Page 1 of 9

G66 Using Coxxon's BZIIRemodeled - A Test

Posted: Thu Dec 24, 2015 10:31 pm
by Red Devil
Okay, trying a little test here; no promises on working without errors.

I tried it on my end using 1.3.7.0 a130g for about 15 minutes and it worked okay.

1. If you don't already have G66 3.1, download and install G66 3.1 >>>> if you already have it installed, just delete the G66_3.1 folder. <<<<

2. Download and install Coxxon's BZII Remodeled in your BZ2 directory.

3. Download and install Coxxon's BZII Remodeled 1.04 Update

4. Download and install this:

>>>> if you already have G66 3.1 installed, delete the G66_3.1 folder. <<<<

G66 3.1 Using Coxxon's BZIIRemodeled v1.26 <<=== Updated 1-26-2016

5. Add the supplied startup cfg to your shortcut; something like this:

C:\BZ2\bzone.exe /nointro /config G66BZIIRemodeled.cfg

Please let me know of any problems.

Re: G66 Using Coxxon's BZIIRemodeled - A Test

Posted: Fri Dec 25, 2015 12:29 am
by Red Devil
updated instructions

Re: G66 Using Coxxon's BZIIRemodeled - A Test

Posted: Fri Dec 25, 2015 6:56 am
by Red Devil
i'll post fixes in the morning

Re: G66 Using Coxxon's BZIIRemodeled - A Test

Posted: Sat Dec 26, 2015 3:42 am
by Red Devil
Okay, uploaded fixes and improvements. Use instructions and link in first post.

Re: G66 Using Coxxon's BZIIRemodeled - A Test

Posted: Sat Dec 26, 2015 3:04 pm
by Axeminister
Tried it and got this:

---- Battlezone II Log File ----
//=====================================================
App version: bzone 1.3.7-a130h Dec 17 2015 21:05:00
Windows version: Windows Version: 6.1.7601 'Service Pack 1' PlatformID=2

Last few battlezone.log lines (may or may not be relevant):
DIAG| DXUT:5458 |09:02:10|264 | AttemptAcquire device = 0x0CF1D700, lost = 1, paused = 0
DIAG| DXUT:5474 |09:02:10|264 | noticed device lost
DIAG| DXUT:5478 |09:02:10|264 | Coop level check failed.
DIAG| DXUT:5544 |09:02:10|264 | Try to reset the device
DIAG| vid:797 |09:02:10|391 |In Vid::OnResetDevice, pd3dDevice = 0x0CF1D700
DIAG| vid:832 |09:02:10|391 |Done Vid::OnResetDevice

DIAG| vid:1391 |09:02:10|391 |Attempted acquire & render, lost = 0 0
DIAG| input:1716 |09:02:10|402 |mouse, Left=0 Right=1
(done)

Exception code: C0000005 (ACCESS VIOLATION) READING from 00000000h
Message : Exception
Error occurred at 12/26/2015 09:02:12.
C:\BZ2 1.3.7.0\bzone.exe, run by Arthur.
C:\BZ2 1.3.7.0\bzone.exe, run by Arthur.
CPU: 4 processor(s), Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz
Intel64 Family 6 Model 37 Stepping 2
Process Memory : 1732 MB free out of 2048 MB total
Physical memory: 5127 MB free out of 8120 MB total
Page(swap) file: 13461 MB free out of 16237 MB total
This exe is using 62 MB (9 MB dlmalloc), peak use 69 MB

Fault address: 003406CB 01:0023F6CB C:\BZ2 1.3.7.0\bzone.exe

Registers:
EAX:00000000
EBX:00000000
ECX:7B0C6AFD
EDX:24C5B6E7
ESI:003D50E4
EDI:003D5100
CS:EIP:0023:003406CB
SS:ESP:002B:0608DE4C EBP:0608DE84
DS:002B ES:002B FS:0053 GS:002B
Flags:00210246

Call stack:
Address Offset1 Offset2 Module SourceFile
003406CB +002406CB 0000022D bzone (bzone): : Input::Init

0035E694 +0025E694 000001B2 bzone (bzone): : Main::CoreSystemInit

001A6D40 +000A6D40 0000000A bzone (bzone): : AppStart

001A72F8 +000A72F8 0000022B bzone (bzone): : HandledMain

001A3B2F +000A3B2F 0000006B bzone (bzone): : WinMain

00159B65 +00059B65 00000125 bzone (bzone): : __tmainCRTStartup

768D337A +0001337A 00000012 kernel32 (kernel32): : BaseThreadInitThunk

77D99882 +00039882 00000063 ntdll (ntdll): : RtlInitializeExceptionChain

77D99855 +00039855 00000036 ntdll (ntdll): : RtlInitializeExceptionChain

Re: G66 Using Coxxon's BZIIRemodeled - A Test

Posted: Sat Dec 26, 2015 4:44 pm
by Axeminister
Here is the cfg wording in shortcut:

"C:\BZ2 1.3.7.0\bzone.exe" /config G66BZIIRemodeled.cfg

Re: G66 Using Coxxon's BZIIRemodeled - A Test

Posted: Sat Dec 26, 2015 5:06 pm
by Commando
Ignore previous message

Re: G66 Using Coxxon's BZIIRemodeled - A Test

Posted: Sat Dec 26, 2015 5:08 pm
by Commando
I tried to join your game, but I get nothing but an unknown NATNeg error has occurred.

DIAG| NetCommands:2124 |11:05:03|8306 |Join to 'Axeminister :BZ2 Remodeled ' / ip 0x00000000
DIAG| SessionMgr:599 |11:05:03|8308 |pSessionAddr = '76.186.184.66:17770'. pNiceName = 'Axeminister :BZ2 Remodeled '
DIAG| RaknetManager:547 |11:05:10|15007 |Raknet client connect failing with status code 17

DIAG| SessionMgr:748 |11:05:10|15007 |Join fail because of 0 || 1 || 4 - count 6699, reason 7
DIAG| SessionMgr:823 |11:05:10|15007 |Showing failed join message 'NatNegotiate failed: unknown error. Try joining another session?'
DIAG| NetCommands:2112 |11:05:13|18903 |JoinIP to '76.186.184.66:17770'
DIAG| SessionMgr:599 |11:05:13|18905 |pSessionAddr = '76.186.184.66:17770'. pNiceName = 'Autojoined Game'
DIAG| RaknetManager:547 |11:05:20|25595 |Raknet client connect failing with status code 17

DIAG| SessionMgr:748 |11:05:20|25595 |Join fail because of 0 || 1 || 4 - count 6690, reason 7
DIAG| iface:1479 |11:05:20|25595 |UnsetModal: throwing away [JoinIPDialog]
DIAG| SessionMgr:823 |11:05:20|25595 |Showing failed join message 'NatNegotiate failed: unknown error. Try joining another session?'
DIAG| RaknetManager:547 |11:05:27|32478 |Raknet client connect failing with status code 17

Re: G66 Using Coxxon's BZIIRemodeled - A Test

Posted: Sat Dec 26, 2015 7:25 pm
by Red Devil
Axe, did you make a copy of a130h and install G66 and BZIIRemodeled? if so, i'm thinking it may need another firewall exception may need to be added manually?

Re: G66 Using Coxxon's BZIIRemodeled - A Test

Posted: Sat Dec 26, 2015 7:56 pm
by Commando
Looks like another game is up, unfortunately the same thing.

DIAG| WSInterface:213 |13:54:33|5282 |Determined private IP address: 192.168.1.27
DIAG| WSInterface:199 |13:54:33|5282 |Determined public IP address: 184.186.91.175
DIAG| NetCommands:2124 |13:54:35|7424 |Join to 'Axeminister G66 remodeled' / ip 0x00000000
DIAG| SessionMgr:599 |13:54:35|7426 |pSessionAddr = '76.186.184.66:17770'. pNiceName = 'Axeminister G66 remodeled'
DIAG| RaknetManager:547 |13:54:42|14133 |Raknet client connect failing with status code 17

DIAG| SessionMgr:748 |13:54:42|14133 |Join fail because of 0 || 1 || 4 - count 6707, reason 7
DIAG| SessionMgr:823 |13:54:42|14133 |Showing failed join message 'NatNegotiate failed: unknown error. Try joining another session?'

Re: G66 Using Coxxon's BZIIRemodeled - A Test

Posted: Sat Dec 26, 2015 8:02 pm
by Red Devil
i updated the zip pointed to the link is step 3, so re-download that again.

wondering if Axe may not have a firewall entry for that install.

Re: G66 Using Coxxon's BZIIRemodeled - A Test

Posted: Sat Dec 26, 2015 8:15 pm
by Axeminister
it's not the firewall. It was added when 1.3.7.0 was installed. The Remodeled mod works fine on 1.3.7.0h, but this G66BZIIRemodeled.cgf will not play. Get that same av every time. Don't know why Commando couldn't join when I played just the Remodeled mod earlier.

Re: G66 Using Coxxon's BZIIRemodeled - A Test

Posted: Sat Dec 26, 2015 8:57 pm
by Red Devil
Commando and H-B are able to join and enter my session.

Re: G66 Using Coxxon's BZIIRemodeled - A Test

Posted: Sat Dec 26, 2015 9:21 pm
by mase
What patch are you hosting on, Red Devil?

Re: G66 Using Coxxon's BZIIRemodeled - A Test

Posted: Sat Dec 26, 2015 10:11 pm
by Red Devil
latest private
did you just try to join?